Horizontal Conveyorized Equipment

Alternative Oxide Line

Alternative Oxide Line comes standard with lead in, cleaner module, 3 stage rinse, oxide replacement, 3 stage rinse, air blowoff, lead out.

Key Features include:

  • Euro-beige or white .5″ polypropylene construction
  • Easy-open front and top access doors
  • Water Saver sensor for Rinses
  • Uses IPS Ultra-Thin Core Transport systems capable of transporting 2 mil core leaderless
  • Enhanced Heated Dryer

Chemical Clean

Our standard Chemical Clean comes with Lead In, Spray Cleaner, 2 Stage Counter Flow Rinse, Blow Off, Lead Out.

Key Features include:

  • Single Stage and Double Stage lines available
  • Enhanced heated dry
  • 2″ wheel conveyor system capable of running 3 -250 mil panel thickness 26 .5″ conveyor width
  • Euro-beige or white .5″ polypropylene construction
  • Easy-open front and top access doors
  • Water Saver sensor for Rinses
  • Ultrasonics flood optional

Developer

Our standard Developers and Solder Mask Developers come with Lead In, Develop Chamber, 2-Stage Counter-flow Rinse, 1-Stage Blow-off, Lead Out.

Key Features include:

  • Yellow tinted Glass for Process Chamber
  • Oscillating manifolds telescope out of the machine for easy maintenance and PM
  • Developer Concentrate Controller measures pH and doses automatically into main chamber
  • 2″ wheel conveyor system capable of running 3 -250 mil panel thickness 26 .5″ conveyor width
  • Euro-beige or white .5″ polypropylene construction
  • Easy-open front and top access doors
  • Water Saver sensor for Rinses

Direct Metallization

Machines compatible with Graphite, Palladium, Conductive Polymers processes.

Key Features include:

  • Single and Double Pass Options
  • Ultrasonics upper and lower
  • Inline Desmear available

Etching

Integrated Process Systems, Inc designs and manufacturers a complete spectrum of versatile, reliable and high performing wet chemical spray processing machinery specifically for the needs of the electronic producer of hybrids, thin and thick film, semi-conductor and printed wiring board circuitry.

    Hole Clean

    Our standard Hole Clean come with Lead In, High Pressure Blow Off, Ultrasonic Flood, High Pressure Rinse, Blow Off, Lead Out.

    Key Features include:

    • 100-150 psi Reciprocating Air Heads
    • 2 Stage Ultrasonics Available
    • 1000 psi high pressure rinse
    • 2″ wheel conveyor system capable of running 3 -250 mil panel thickness 26 .5″ conveyor width
    • Euro-beige or white .5″ polypropylene construction
    • Easy-open front and top access doors
    • Water Saver sensor for Rinses
    • Bag filtration on ultrasonic system

     

      Pre Clean

      Our standard Pre-Clean come with Lead In, Spray Cleaner, 2-Stage Counter-flow Rinse, 1-Stage Blow-off, Lead Out.

      Key Features include:

          • Manifolds telescope out of the machine for easy maintenance and PM
          • Enhanced heated dryer option
          • 2″ wheel conveyor system capable of running 3 -250 mil panel thickness 26 .5″ conveyor width
          • Euro-beige or white .5″ polypropylene construction
          • Easy-open front and top access doors
          • Water Saver sensor for Rinses
          • Additional Fluxor module can be added
          • Containment tray available for entire line

      Resist Stripper

      Complete Polypropylene construction used throughout machine.  Our standard machine consist of a Lead-in, Resist Strip Chamber, a 2-Stage Counter-flow Water Rinse, a 1-Stage Blow-off Module, and a Lead-out Module.

      Key features include:

      • Barrel Filter or Cyclonic Filter for removing Resist out of machine
      • Resist Stripper Concentrate Controller doses strip solution in process sump automatically.
      • Polish Module in addition to main strip chamber
      • Main strip chamber can be broken down into dual smaller chambers
      • All Polypro plumbing and construction

         

          Tin Stripper

          Our standard Tin Strippers come with Lead In, Develop Chamber, 2-Stage Counter-flow Rinse, 1-Stage Blow-off, Lead Out.

          Key Features

          • Manifolds telescope out of the machine for easy maintenance and PM
          • Concentrate Controller measures Specific Gravity and doses automatically into main chamber
          • 2″ wheel conveyor system capable of running 3 -250 mil panel thickness 26 .5″ conveyor width
          • Euro-beige or white .5″ polypropylene construction
          • Easy-open front and top access doors
          • Water Saver sensor for Rinses

          Combatable with Nitric based systems as well as other chemistries

            Why VRP?

            Accurate and repeatable precision spray processing can only be achieved by uniformly exposing the surface of the workpiece to a controlled flow of fluid for a specific period of time. Simply exposing the workpiece to a pressurized fluid spray will invariably produce uneven results due to such common conditions as puddling, tear-dropping and nozzle-patterning. Standard vertical spray technicians, even rotation, wont eliminate these problems – IPS, Inc VRP does!

            There are five Dynamil VRP precision chemical spray processing machines for every experimental prototype or production of wet impingement recruitment. By precision, we mean consistent tolerances of less than 1 mil apart.

            The secret to this accuracy is VRP – Vertical Rotary Planetary – a new patented method of chemical spraying that insures uniform processing and tight tolerances by eliminating common variables mentioned above. The VRP method works the piece vertically, rotated in a planetary motion- a continuous process that prevents a given point (substrate) from being worked again. Each VRP model is custom engineered using thermoplastics and/or metal, depending on your needs. The VRP is suitable for designated application and has only two moving parts. The VRP mechanism and the IPS, Inc centrifugal pump.

            Other standards features include, built-in light and rinse tank, circulating water bath, solid state digital temperature control, automatic resetting times, and complete instrumentation to control the wet spray process. Contact our sales team at sales@ips-vcm.com or call 435-586-1188.

            Integrated Process Systems, Inc.

            2183 West Park Avenue
            Cedar City, UT 84720 USA

            Phone: +1 (435) 586-1188
            Fax: +1 (435) 867-0815

            Let's Chat

            2 + 2 =

            CALL NOW